Pump
Sump
Sump
Pump
THE BDry® SYSTEM
Installation Process
To Install the BDry® Basement Waterproofing System, a portion of the floor slab is carefully and temporarily removed, and then a trench is created to slope toward a drainage point. Weep holes are then drilled into the core of the concrete blocks in order to drain them constantly. Next, our BDry® waterproofing membrane Rigid Sealer is placed on the interior wall, and then our high capacity BDry® Pipe is installed in the trench next to the footing.
THE BDry® SYSTEM
Materials Used by BDry®
BDry® uses only the highest quality, American-made foundation repair materials that meet the latest ICC specifications. BDry® only uses materials from well-established companies and has done so since 1958.
THE BDry® SYSTEM
Service Above All
The trained professionals at BDry Systems of SW Indiana make sure you understand what is causing your basement to leak and will recommend the most economical and practical solution for your individual situation.
THE BDry® SYSTEM
What Is A Sump Pump?
THE BDry® SYSTEM
Basic Installation Process
Ensure your basement stays dry and your foundation secure with a professionally installed sump pump system. Our step-by-step installation process guarantees efficient water management, safeguarding your property from floods and water damage. From selecting the right pump to creating a secure drainage system, we offer top-notch service tailored to your needs. Contact us today for expert advice and hassle-free installation!
THE BDry® SYSTEM
Pump Maintenance
The manufacturers of sump pumps typically recommend that the pump be inspected at least once per year. If your pump runs frequently, it is a good idea to check it more frequently. A good sump pump inspection should verify pump operation; ensure nothing is hindering the movement of the float switch; confirm the check valve is functional; test and service battery back-up if equipped; replace high water alarm battery if equipped; and make certain the discharge line is unobstructed and pumping the water away from the home’s foundation.
Don't Chump
Your Pump
Sump Pump FAQs
What is a sump pump?
This is a water removal pump that is typically installed in a sump basin below your basement floor or crawlspace. As water builds up underneath your foundation, it is moved to the sump basin by various means and the sump pump then pumps this water to an area outside the home to keep the basement from flooding.
What type of sump pump do I need?
There are many types and sizes of sump pumps available and each situation is unique. B-Dry® Systems of SWI has more than 30 years experience in sump pump selection and installation and can provide expert advice if needed.
Types of pumps available include:
Submersible Pumps
Benefits – Most efficient, longer lasting, quieter, hidden in sump basin
Drawbacks – Require larger sump, more difficult to install
Pedestal Pumps
Benefits – Fits in small sumps, easy to install, lower cost
Drawbacks – Less efficient, shorter life, more noise, protrudes above top of sump
Battery Back-up Pump (DC Pump)
Benefits – Works during power outages, provides back up if main pump fails
Drawbacks – Requires periodic battery replacement, typically less efficient
Water-Powered Pump
Benefits – Works during power outages, does not require battery, provides back if main pump fails
Drawbacks – Low efficiency, difficult to install, uses tap water when operating, may require backflow prevention valve
How long will my sump pump last?
This question is almost impossible to answer. Depending on the quality of your pump and the frequency that it runs, your pump may last 5 years or it may last 20 years. The challenge with knowing when to replace a sump pump is that they rarely show signs of wearing out. They simply stop working. Due to the serious consequences of a pump not working when it is needed, waiting for your pump to break before replacing is not the best strategy unless you have a robust back-up pump. If you only have a single pump, B-Dry® Systems of Louisville recommends you replace your pedestal pump every 5-6 years and your submersible pump every 8-10 years.
What’s a check valve? Do I need one?
A check valve is a one-way valve that is installed in the pump discharge line. A check valve may not be a necessity, but is always a good idea. Since a sump pump is pumping water upwards in the discharge line, when the pump stops running any water remaining in the discharge line will drain back into the sump without a check valve. The pump will then have to pump this water out again thereby increasing the run time of the pump.
Should I install a backup pump? Or a second pump?
If you can’t afford to have water in your basement, a back-up or secondary pump is highly recommended. During a power outage, which often happens during heavy thunderstorms, your primary AC sump pump will no longer run until power is restored. Further, there is no guarantee that your primary AC sump pump won’t fail. Even new pumps sometimes fail prematurely. A back-up or secondary pump can also provide additional capacity should the amount of water entering your sump exceed the capacity of your primary pump. To prevent water in your basement in any of these situations, it is a good idea to have either a back-up pump or a secondary pump, preferably one that can be powered by a battery during a power outage.
It is also a good idea to install a high water alarm in your sump so you will know if water is rising in your sump before it overflows into your basement. Your B-Dry® Systems of SW consultant can help you design an effective sump pump system to greatly reduce the chance of water overflowing onto your basement floor.
How do I check my pump to see if it’s working?
In most instances, there is no problem with the pump. There is just not sufficient water in the sump to activate the pump switch. If you want to verify your pump is functioning, the very best method is to slowly pour water into the sump. Depending on the set point of the pump switch, the pump should turn on and pump the water out of the sump when the sump is less than 2/3’s full.
Warning! A pump with an electrical short can be deadly. Never contact a defective sump pump or the water in which it sits while the pump is plugged into a working electrical outlet. Always thoroughly read the manufacturer’s instructions before attempting to test a pump.
If you cannot easily put water into the sump, you can also check to see if your pump will run when energized. This method will tell you if your pump runs but will not necessarily tell you it will pump water. Do not leave the pump running like this however, or the pump may overheat.